To lay the paving, place the tiles in a « stepping stone » arrangement. It is important to estimate the number of stepping stones needed to complete the path, then arrange the tiles an equal distance apart.
Novoceram Outdoor Plus
Laying on grass
Video
For optimum stability, dig out to a depth of 5 to 6 cm and add a bed of fine gravel with a grain size of between 4 and 8 mm. Consolidate the substrate before laying the tiles. The tiles should remain below the level of the grass to avoid damaging the lawnmower when it passes.The laying can also be carried out on concrete rather than gravel.
Step by step
Position the slab
Position the Novoceram Outdoor Plus slabs according to your desired installation pattern
Mark out perimeter
Using a shovel and with the slab on the grass, mark out around the entire perimeter of the slab
Remove slab
Remove the slab
Dig
Dig 5-6 cm deep across the entire area you have just marked out
Fine gravel
Fill the hole excavated with fine gravel. Level the surface
Set into position
Now set the slab into position
Ensure slab set correctly
Ensure slab set correctly by lightly beating it with a rubber hammering tool
Ready
Novoceram Outdoor Plus slabs installed onto grass can be walked on immediately after laying
Warning
.The recommendations for installation are provided as examples of the type of chosen application: Novoceram recommends to refer to the applicable regulations in your country to carry out a state-of-the-art installation.
Cutting Tips
Video
Check out the video for cut tips.
Water-cooled bench mounted power saw
Continual toothed disc suitable for cutting tiles.
Angle grinder
Continual toothed disc suitable for cutting tiles.
